|
|
|
|
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01515
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01515, powered by Cat C7, (6) cylinder diesel engine and powershift transmission with auto shift, equipped with general purpose loader bucket with bolt-on cutting edge, ride control, rearview camera, enclosed ROPS cab with heat and air conditioning, and 23.5R25 tires. In good condition with fair tires. (Meter Reads 6,885 Hours) |
|
|
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01516
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01516, powered by Cat C7, (6) cylinder diesel engine and powershift transmission with auto shift, equipped with high lift configuration, general purpose loader bucket with bolt-on cutting edge, ride control, onboard scale, rearview camera, enclosed ROPS cab with heat and air conditioning, and 23.5R25 tires. In good condition with fair tires. (Meter Reads 11,073 Hours) |
|
|
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01517
2013 CATERPILLAR Model 950K Rubber Tired Loader, s/n R4A01517, powered by Cat C7, (6) cylinder diesel engine and powershift transmission with auto shift, equipped with high lift configuration, general purpose loader bucket with bolt-on cutting edge, ride control, onboard scale, rearview camera, enclosed ROPS cab with heat and air conditioning, and 23.5R25 tires. In good condition with good tires. (Meter Reads 12,059 Hours) |
|
|
2013 CATERPILLAR Model 336EL Hydraulic Excavator, s/n FJH00561
2013 CATERPILLAR Model 336EL Hydraulic Excavator, s/n FJH00561, powered by Cat C9.3, (6) cylinder diesel engine and hydraulic drive, equipped with 11’ dipper stick, 48” digging bucket, auxiliary hydraulics, rearview camera, enclosed ROPS cab with heat and air conditioning, pattern changer, and 33.5” TBG pads. In good condition with good undercarriage. (Meter Reads 11,074 Hours) (Wired For Magnet) |
|
|
2008 CATERPILLAR Model 420E, 4x4 Tractor Loader Extend-A-Hoe, s/n HLS05448
2008 CATERPILLAR Model 420E, 4x4 Tractor Loader Extend-A-Hoe, s/n HLS05448, powered by Cat (6) cylinder diesel engine and shuttle transmission, equipped with general purpose loader bucket with bolt-on cutting edge, hydraulic demolition hammer, 18” digging bucket, rear auxiliary hydraulics, and enclosed ROPS cab with heat. In fair condition with fair tires. (Meter Reads 88,071 Hours) (4x4 Not Operating) |
|
|
1996 MACK Model RD688S Tri-Axle Dump Truck, VIN# 1M2P267CXTM028439
1996 MACK Model RD688S Tri-Axle Dump Truck, VIN# 1M2P267CXTM028439, powered by Mack E7 350 diesel engine and Fuller 8LL, 10 speed transmission, equipped with 17’6” steel dump body with electric tarp, 2-stage engine brake, 44,000# rears, camelback suspension, heated mirrors, air conditioning, 385/65R22.5 front and 11R24.5 rear and lift tires. In good condition with good tires. (Odometer Reads 382,736 Miles) (Meter Reads 30,270 Hours) |
|
|
1998 MACK Model RD600GK Tri-Axle Dump Truck, VIN# 1M3P114K1WM001695
1998 MACK Model RD600GK Tri-Axle Dump Truck, VIN# 1M3P114K1WM001695, powered by Mack 300 diesel engine and 6 speed lo-hole transmission, equipped with 18’ steel dump body, 2-stage engine brake, 44,000# rears, camelback suspension, air conditioning, and 11R24.5 tires. In good condition with fair to good tires. (Odometer Reads 399,977 Miles) (Meter Reads 14,028 Hours) (Off Road Only) |
|
|
1989 MACK Tri-Axle Dump Truck, VIN# 1M2P141C5XW007579
1989 MACK Tri-Axle Dump Truck, VIN# 1M2P141C5XW007579, powered by Mack 350 diesel engine and 10 speed transmission, equipped with 18’6” aluminum dump body with chute, 44,000# rears, spring/beam suspension, heated mirrors, air conditioning, and 11R24.5 tires. In fair condition with poor tires. (Odometer Reads 974,411 Miles) (Meter Reads 0,528 Hours) (Off Road Only; Missing 2 Lift Tires) |
|
|
1986 MACK Model RD688S Tri-Axle Dump Truck, VIN# 1M2P141C3GA004619
1986 MACK Model RD688S Tri-Axle Dump Truck, VIN# 1M2P141C3GA004619, powered by Mack 350 diesel engine and 10 speed transmission, equipped with 17’ steel dump body, engine brake, 44,000# rears, spring/beam suspension, heated mirrors, air conditioning, 385/80R22.5 front and 11R24.5 lift and rear tires. (Odometer Reads 331,408 Miles) (Meter Reads 0,682 Hours) (Off Road Only) (Missing 3 Lift Axle Tires) |
|
|
1978 MACK Model RD612SX Tri-Axle Dump Truck, VIN# RD612SX1509
1978 MACK Model RD612SX Tri-Axle Dump Truck, VIN# RD612SX1509, powered by Mack 350 diesel engine and 6 speed lo-hole transmission, equipped with 17’6” steel dump body, camelback suspension, and 11R24.5 tires. In fair condition with fair to poor tires. (Odometer Reads 918,852 Miles) (Meter Reads 3,813 Hours) (Off Road Only) |
|
|
1986 MACK Model RD688S Tandem Axle Truck Tractor, VIN# 1M2P141C1GA004621
1986 MACK Model RD688S Tandem Axle Truck Tractor, VIN# 1M2P141C1GA004621, powered by Mack 300 diesel engine and 10 speed transmission, equipped with stationary 5th wheel, engine brake, 44,000# rears, spring/beam suspension, 228” wheelbase, heated mirrors, and air conditioning. In good condition with fair to poor tires. (Odometer Reads 340,048 Miles) (Meter Reads 2,126 Hours) (Off Road Only) |
|
|
1989 WHITE/GMC Tandem Axle Water Truck, VIN# 4V2VDBRH2KN617367
1989 WHITE/GMC Tandem Axle Water Truck, VIN# 4V2VDBRH2KN617367, powered by Detroit Series 60 diesel engine and Fuller 13 speed transmission, equipped with approximately 2,000 gallon water body, Pacer 2” pump, Honda GX160 has engine, spring suspension, cruise control, 375/70R24.5 front and 11R24.5 rear tires. In fair condition with fair tires. (Odometer Reads 007,490 Miles) (Off Road Only) |
|
|
1988 FORD Model L8000 Single Axle Plow Truck, VIN#1FDYK82A3JVA57973
1988 FORD Model L8000 Single Axle Plow Truck, VIN#1FDYK82A3JVA57973, powered by (6) cylinder diesel engine and automatic transmission, equipped with 10’ steel dump body with chute, stainless steel hydraulic salt spreader, 11’ gear drive hydraulic angle snowplow, air brakes, 39,000# GVWR, and 11R22.5 tires. In fair condition with good to very good tires. (Odometer Reads 139,121 Miles) (Meter Reads 6,911 Hours) (Off Road Only) |
|
|
2006 FORD Model F150XL Pickup Truck, VIN# 1FTRF12276NA41957
2006 FORD Model F150XL Pickup Truck, VIN# 1FTRF12276NA41957, powered by V-6, 4.2L gas engine and automatic transmission, equipped with 8’ bed, 50 gallon fuel tank with 12 volt pump. In fair condition. (Odometer Reads 67,657 Miles) (Bed Damage) |
|
|
1999 DODGE Dakota SLT, 4x4 Extended Cab Pickup Truck, VIN#1B7GG22Y1XS295665
1999 DODGE Dakota SLT, 4x4 Extended Cab Pickup Truck, VIN#1B7GG22Y1XS295665, powered by V-8 gas engine and automatic transmission, equipped with Western 8’ power angle snow plow, Buyers Salt Dogg salt spreader, and power windows and locks. In fair conditioning with far tires. (Odometer Reads 149,420 Miles) (Off Road Only) |
|
|
2002 FINLAY Model 596 Crawler Screen, s/n FOB520094
2002 FINLAY Model 596 Crawler Screen, s/n FOB520094, powered by Deutz 4 cylinder diesel engine and hydraulic drive, equipped with vibrating grizzly with hydraulic raise, 42” transfer conveyor, 42” hydraulic oscillating discharge conveyor, umbilical remote control, and 16” TBG pads. In good condition with good undercarriage. (Meter Reads 03,993 Hours) |
|
|
2003 FINLAY Model 770 Portable Trommel Screen, s/n FTT530109
2003 FINLAY Model 770 Portable Trommel Screen, s/n FTT530109, powered by Deutz diesel, equipped with feed hopper with vibrating grizzly with hydraulic raise, 48” front transfer conveyor, 48” front discharge conveyor, 49” trommel feed conveyor, 40” discharge conveyor, (4) hydraulic jacks, and 385/65R22.5 tires. In good condition with fair to good tires. (Meter Reads 04,684 Hours) |
|
|
2012 GUNDLACH Model 4020S Roll Crusher, s/n 2673
2012 GUNDLACH Model 4020S Roll Crusher, s/n 2673, powered by (2) 60HP electric motors, equipped with hydraulic adjustment, remote lube system, structure, access stairs, (2) roll, single stage. In good condition. (Limited Use) |
|
|
Radial Stackers
NORTHSTAR 24”x100’ Radial Stacker, powered by 15HP electric motor with Dodge gear reducer, equipped with 1HP chain drive travel motor, manual raise, manual angle wheels, 36” truss, partial galvanized hood, catwalk, pull cord stop, and 205/75R2.5 tires. In good condition with good tires • (2) NORTHSTAR 24”x80’ Radial Stackers, powered by 15HP electric motors with Dodge gear reducers, equipped with manual raise, manual angle wheels, 36” truss, catwalk, pull cord stop, and 205/75R22.5 tires. In good condition with good tires. |
|
|
2008 TRIO 10x30 Jaw Crusher, s/n CT10X30-S212
2008 TRIO 10x30 Jaw Crusher, s/n CT10X30-S212, powered by 40HP electric motor, on skid mounted structure with 36”x20’ channel feed conveyor and 48”x20’ channel discharge conveyor. |
|
|
24”x140’ Plant Feed Conveyor
24”x140’ Plant Feed Conveyor (20’8” channel, 120’x24” truss), equipped with galvanized hood, scale, and catwalk. |
|
|
Plant Parts
Plant Parts: Head and Tail Pulleys • Troughing Idlers • Conveyor Belting • Ceramic Head Pulley • Pump Parts • Screen Material • V-Belts • Electric Motors |
|
|
2008 RICE LAKE Survivor, Model OTRST, 100 Ton Electronic Pitless Truck Scale, s/n 39D9
2008 RICE LAKE Survivor, Model OTRST, 100 Ton Electronic Pitless Truck Scale, s/n 39D9, 11’x70’ (3) section diamond plate steel deck, rub rails, remote digital weight indicator, 8’x20’ skid mounted scale house: insulated, heat, air conditioning, lights, bathroom, IQ Plus model RL710 digital scale head, computer, monitors, printer, copier, and ticket printer. In good condition. (BUYER MUST DISMANTLE AND LOAD) |
|
|
ACTON 24’x44’ Modular Office
ACTON 24’x44’ Modular Office, with (4) offices, (2) bathrooms, kitchen, electric heat, air conditioning, and skirting. (BUYER MUST DISMANTLE AND LOAD) |
|
|
AMERICAN STEEL 40’x80’x20EH Open Span Steel Building
AMERICAN STEEL 40’x80’x20EH Open Span Steel Building, with skylights, lights, mezzanine, heat, (2) 14’H x 16’W overhead doors, transformer, and bolted columns. In good condition. (BUYER MUST DISMANTLE AND LOAD) |
|
|
DATSUN 5,000# Cushion Tired Forklift, s/n PF02-001356
DATSUN 5,000# Cushion Tired Forklift, s/n PF02-001356, powered by 4 cylinder propane engine, equipped with 130” 2-stage mast, 42” forks, and ROPS canopy. In good condition with good tires. (Meter Reads 4,597 Hours) |
|
|
TURBO TURF 250 Gallon Hydroseeder, s/n 6051
TURBO TURF 250 Gallon Hydroseeder, s/n 6051, powered by Honda 10HP gas engine, equipped with Franklin 3” centrifugal pump and valve agitation. In good to very good condition. |
|
|
Lab Equipment
Lab Equipment: GILSON Model TS-1 Testing Screen, s/n 17547 • GILSON Sieve Shaker, with digital readout • (2) GILSON SP1 and SP2 Sample Splitters • (2) GILSON Digital Scales • (2) Test Jigs |
|
|
Shop/Contractors Tools and Miscellaneous
Shop/Contractors Tools and Miscellaneous: AVENGER 48”x48” Digital Platform Scale • Lincoln Ranger 305G, 300 Amp Gas Powered Portable Welder/Generator, s/n U1080409497 (1,477 Hours) • Ladders • Horizontal Band Saw • INGERSOLL RAND 2475, 7.5HP Vertical Shop Air Compressor, single phase • MEGGER Insulation Tester • SLUGGER Magnetic Drill Press • Impact Wrenches • ROCKWELL 20 Variable Speed Drill Press • Bolt Bins • 20 Ton Hydraulic Shop Press • Torch Set and Cart • LINCOLN 250 Amp Electric Welder • 36” Electric Conveyor Belt Winder • AEMC Model 103 Power and Energy Logger |
|
|
Slag Recovery Jigging Plant (Sold As An Entirety in One Lot – Buyer Must Dismantle and Load)
Slag Recovery Jigging Plant (Sold As An Entirety in One Lot – Buyer Must Dismantle and Load)
The plant was designed and built by ATOLL, started production in November 2008 and operated continuously until shutdown in November 2018. The facility has a practical capacity 75TPH with total production of approximately 3,000,000 tons at a new cost of $6,000,000
Jigging Facility Including: (2) Apic Jigs (coarse and fine) with (3) 30” compartments, Air Pulse provided through Boge Air Compressors and Aerzen 100HP blowers, Vipro 5’x9’ dewatering screens, (3) 1’x4’ high frequency dewatering screens and Warman 8”x6” rubber lined pumps with 55HP motors.
Screen Tower and Conveyors with: (2) VIPRO 5’x14’ Single Deck Wet Vibrating Screens • 24” Truss and Channel Conveyors, with catwalk and safety shutdown: 24”x112’ with scale • 24”x120’ with scale • 24”x90’ • 36”x22’
Miscellaneous Channel Conveyors: 18”x40’ • (2) 24”x60’ • 36”x20’
OUTOKUMPU 17’ Thickener Tank, with hydraulic rakes with power lift, Bredel 3” peristaltic sludge pump and Warman 4”x3” pump
Fines Tower with (2) Krebs GMAX20-S3353SSC rubber lined cyclones Vipro 3’x8’ vibrating dewatering screen, tank, and (2) Warman 4”x3” 30HP pumps
Enclosed in an American Steel 80’W x 160’L x 36’ EH Open Truss Steel Building, with (6) 14’H x 16’W overhead doors, (2) man doors, lights, roof vent, fully insulated, bolted columns. |
|
|
Transformer and Main Disconnect (Sold Separately from Plant – Buyer Must Load)
Transformer and Main Disconnect (Sold Separately from Plant – Buyer Must Load): JERRY’S ELECTRIC 2,000KVA Oil Filled Transformer, s/n 22008-3, 2100V incoming – 480V/277V out, 3-phase, 60 Hertz, 11,555#, 455 gallons of oil • GENERAL ELECTRIC Model AKD-8 Switch Gear Main Disconnects, with (1) G.E. low voltage circuit breaker, 635V, 3200 amp with fault trip annunciator, (4) G.E. low voltage circuit breakers, 635V, 1600 amp, skid mounted |
|
