HomeGallery
1982 COOPER Model LTO-150 Double Drum Service Rig, s/n S213105
1982 COOPER Model LTO-150 Double Drum Service Rig, s/n S213105
1982 COOPER Model LTO-150 Double Drum Service Rig, s/n S213105, powered by Detroit 6V71 diesel engine and Allison 6 speed air shift automatic transmission, equipped with right angle drive, Pemco 71' hydraulic raise and telescope 4-legged 60’ 150,000# derrick, 26 x 26 drawworks, air clutches, double brake bands, auxiliary hydraulic circuit, 10,000# auxiliary hydraulic winch, 4-hydraulic outriggers, derrick high pressure mud and hydraulic steel lines, racking board, rear fold-up platform, 2-sheave traveling block, tool box, fold-up cat walks with access stairs and safety railings. Mounted on a Crane Carrier Chassis, equipped with Hendrickson spring suspension, 272” wheelbase, 385/65R22-5 front and 11R22.5 rear tires. In good condition. (Odometer Reads 50 Miles) (Newer Truck Cab Has Been Added With New Dash, Seat, And Gauges) (The Service Line Drum Chain Has Been Removed) (Serial Number Tag Missing)

1984 WICHITA Model JRDD Double Drum Service Rig, s/n DD8848
1984 WICHITA Model JRDD Double Drum Service Rig, s/n DD8848
1984 WICHITA Model JRDD Double Drum Service Rig, s/n DD8848, powered by Ford 300 gasoline engine and 5 speed transmission, equipped with cable raise and telescope 5” x 7” x 55’ single pole mast, air clutches, dual brake bands, spooling device and sheave, tool rack, tool box, cab protector, (2) hydraulic outriggers, single sheave traveling block, weight indicator, 2” & 3” bailers and tools. Mounted on a 1984 International Model F2575 Tandem Axle Cab and Chassis, VIN# 1HSZJJJR3FHA19147, powered by Cummins L-10 diesel engine and Eaton 8 speed transmission, equipped with Hendrickson spring suspension, double frame, 176” wheelbase, engine brake, oilfield bumper, and 11R22.5 tires. In fair to good condition. (Odometer Reads 134,853 Miles) (Hood Cracked)

1984 CATERPILLAR Model D6D Crawler Tractor, s/n 04X09726
1984 CATERPILLAR Model D6D Crawler Tractor, s/n 04X09726
1984 CATERPILLAR Model D6D Crawler Tractor, s/n 04X09726, powered by Cat 3306 diesel engine and powershift transmission, equipped with angle blade with twin tilt, Cat 56E winch, drawbar, ROPS canopy, and 20” SBG pads. In good condition with good undercarriage. (Meter Reads 7,634 Hours)

1997 CATERPILLAR Model 312B Hydraulic Excavator, s/n 9HR01037
1997 CATERPILLAR Model 312B Hydraulic Excavator, s/n 9HR01037
1997 CATERPILLAR Model 312B Hydraulic Excavator, s/n 9HR01037, powered by Cat 3064T diesel engine and hydraulic drive, equipped with 10’2” dipper stick, thumb bracket, 36” digging bucket, enclosed ROPS cab with heat and air conditioning, and 20” TBG pads. In fair condition with fair to good undercarriage. (Meter Reads 06,103 Hours) (Hydraulic Oil Leaks, Windshield Missing and Sheet Metal Panels Damaged) (Display Screen Not Working)

Cat 312B Attachments
Cat 312B Attachments
Cat 312B Attachments: Mechanical Thumb • 24” Digging Bucket

2001 JOHN DEERE Model 310 SG, 4x4 Tractor Loader Extend-A-Hoe, s/n 906462
2001 JOHN DEERE Model 310 SG, 4x4 Tractor Loader Extend-A-Hoe, s/n 906462
2001 JOHN DEERE Model 310 SG, 4x4 Tractor Loader Extend-A-Hoe, s/n 906462, powered by John Deere 4045T diesel engine and powershift transmission, equipped with general purpose loader bucket, 16” digging bucket, rear auxiliary hydraulics, enclosed ROPS cab with heat and air conditioning, ride control, 12.5/80-18 front and 19.5-24 rear tires. In good condition with good tires. (Meter Reads 2,477 Hours)

1979 CASE Model W14 Rubber Tired Loader, s/n 9132755
1979 CASE Model W14 Rubber Tired Loader, s/n 9132755
1979 CASE Model W14 Rubber Tired Loader, s/n 9132755, powered by Case diesel engine and powershift transmission, equipped with 2 cubic yard multi-purpose loader bucket, 48” fork attachment, auxiliary hydraulics, enclosed ROPS cab, and 15.5-25 tires. In fair to poor condition. (Poor Brakes & Broken Cab Glass; Oil Leaks)

Digging Buckets
Digging Buckets
Digging Buckets: (1) 24”, (1) 20”, and (1) 12”

1995 MACK Model CH613 Tandem Axle Cement Pump Truck
1995 MACK Model CH613 Tandem Axle Cement Pump Truck
1995 MACK Model CH613 Tandem Axle Cement Pump Truck, VIN# 1M2AA13Y4SW051022, powered by Mack E-7 diesel engine and Eaton Fuller 9 speed transmission, equipped with Gardner Denver triplex pump with quick knock off valves, 7-barrels per minute capacity, 5,000 PSI, (2) mixing tanks, powered by a Deutz model TCD914L06 175HP diesel engine, hydraulic drives, pulsation dampers & gauges, engine brake, double frame, Mack camelback suspension, aluminum front wheels, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 245,516 Miles) (Meter Reads 25,492 Hours)

1994 MACK Model 688S Tandem Axle Double Tear Drop Cement Truck
1994 MACK Model 688S Tandem Axle Double Tear Drop Cement Truck
1994 MACK Model 688S Tandem Axle Double Tear Drop Cement Truck, VIN# 1M2P267Y8RM018724, powered by Mack E-7 diesel engine and Eaton Fuller 9 speed transmission, equipped with (2) 330 cubic foot cement tanks, PTO operated Gardner Denver pump, Mack camelback suspension, engine brake, aluminum front wheels, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 628,702 Miles) (Meter Reads 26,229 Hours)

1955 Model M-54, 6x6, 5-Ton Water Well Plugging Truck
1955 Model M-54, 6x6, 5-Ton Water Well Plugging Truck
1955 Model M-54, 6x6, 5-Ton Water Well Plugging Truck, VIN# 3029, powered by Cummins diesel engine and 5 speed transmission, equipped with 3,500 gallon steel water tank, shop built motorized hydraulic coil tubing reel & hydraulic spooler, and 10.00R20 tires. In fair condition with good tires. (Odometer Reads 66,865 Miles)

2005 MACK Model CV713 Granite Tandem Axle Water Truck
2005 MACK Model CV713 Granite Tandem Axle Water Truck
2005 MACK Model CV713 Granite Tandem Axle Water Truck, VIN# 1M2AG10C15M026165, powered by Mack E-7 diesel engine and Maxitorque 10 speed transmission, equipped with 80 barrel steel water tank, Masport 3” vacuum water pump, rear spray bar, 18,000# front and 40,000# rear axles, double frame, engine brake, oilfield front bumper, Mack camelback spring suspension, 217” wheel base, 58,000# GVWR, air conditioning, and 11R22.5 tires. In good condition with good tires. (Odometer Reads 336,483 Miles) (Meter Reads 18,467 Hours)

1992 MACK Model CH613 Tandem Axle Dump Truck
1992 MACK Model CH613 Tandem Axle Dump Truck
1992 MACK Model CH613 Tandem Axle Dump Truck, VIN# 1M2AA14Y3NW014854, powered by Mack E-7 diesel engine and Eaton Fuller 9 speed transmission, equipped with Godwin 16’ steel dump body, 12,000# front and 38,000# rear axles, double frame, engine brake, 192” wheelbase, Mack air ride suspension, aluminum front wheels, oilfield front bumper, heated mirrors, cruise control, air conditioning, and 11R24.5 tires. In fair condition with good tires. (Odometer Reads 1,093,708 Miles) (Meter Reads 25,919 Hours) (Cab Rust)

2000 MACK Model RD688S Tandem Axle Truck Tractor
2000 MACK Model RD688S Tandem Axle Truck Tractor
2000 MACK Model RD688S Tandem Axle Truck Tractor, VIN# 1M2P270C4YM049486, powered by Mack E7-400, 400HP diesel engine and Maxitorque T2130, 13 speed extended range transmission, equipped with 20,000# front and 46,000# rear axles, Braden 50,000# winch, double frame, 2-stage engine brake, power divider, oilfield front bumper, 190” wheelbase, Mack camelback spring suspension, elevated stationary 5th wheel, headache rack, 7’ steel oilfield bed, 5” x 36” rear roller tail, aluminum front wheels, cruise control, air conditioning, 385/65R22.5 front and 11R24.5 rear tires. In good condition with good tires. (Odometer Reads 365,196 Miles) (Meter Reads 17,049 Hours)

2009 EAGER BEAVER Model 35GLB, 35 Ton Tandem Axle Lowboy Trailer
2009 EAGER BEAVER Model 35GLB, 35 Ton Tandem Axle Lowboy Trailer
2009 EAGER BEAVER Model 35GLB, 35 Ton Tandem Axle Lowboy Trailer, VIN# 112LAZ37X9L073737, equipped with 8’6”x27’ level deck, 3.5’ beavertail, spring assist fold-up ramps, spring suspension, gooseneck fenders, chain dogs, 81,120# GVWR, and 255/70R22.5 tires. In good condition with good tires. (42’ overall length)

2008 BCA FABRICATION Model BCA50TTA-T1 Tandem Axle Oilfield Float Trailer
2008 BCA FABRICATION Model BCA50TTA-T1 Tandem Axle Oilfield Float Trailer
2008 BCA FABRICATION Model BCA50TTA-T1 Tandem Axle Oilfield Float Trailer, VIN# 1B9TS34218R673012, equipped with 8’x34’ deck, rolling tailboard, spring suspension, and 11R22.5 tires. In good condition with good tires.

2008 FORD Model F-250XL Super Duty 4x4 Quad Cab Flatbed Truck
2008 FORD Model F-250XL Super Duty 4x4 Quad Cab Flatbed Truck
2008 FORD Model F-250XL Super Duty 4x4 Quad Cab Flatbed Truck, VIN# 1FTSX21518EE55240, powered by 5.4L gas engine and automatic transmission, equipped with steel flatbed with 9” wood sides, tow package, king pin pocket, cross toolbox, power windows, locks, and mirrors, and 205/70R17 tires. In fair to good condition with fair to good tires. (Odometer Reads 279,030 Miles) (Windshield Cracked)

2011 GMC Model 2500HD Sierra 4x4 Quad Cab Pickup Truck
2011 GMC Model 2500HD Sierra 4x4 Quad Cab Pickup Truck
2011 GMC Model 2500HD Sierra 4x4 Quad Cab Pickup Truck, VIN# 1GT22ZCG5BZ356247, powered by Vortec 6.0L gas engine and automatic transmission, equipped with 8’ bed with liner, 100 gallon fuel tank with electric pump, material rack, tow package, running boards, power package, air conditioning, cruise control, AM/FM/CD, and 265/70R17 tires. In fair to good condition with fair to good tires. (Odometer Reads 218,809 Miles)

2005 EATON/CUTLER HAMMER Model EG17.5UH35 Skid Mounted Generator
2005 EATON/CUTLER HAMMER Model EG17.5UH35 Skid Mounted Generator
2005 EATON/CUTLER HAMMER Model EG17.5UH35 Skid Mounted Generator, s/n FGWISU01TG0A00281, powered by 4 cylinder propane/natural gas engine, rated at 17.5KVA/17.5KW/240-120 volt, single phase.

GASO Model 1550, 2.5”x5”x10” Mudd Pump, s/n 17262
GASO Model 1550, 2.5”x5”x10” Mudd Pump, s/n 17262
GASO Model 1550, 2.5”x5”x10” Mudd Pump, s/n 17262, powered by Detroit 3 cylinder diesel engine, oilfield skid mounted. In good condition. (Meter Reads 1,517 Hours)

CANAAN INDUSTRIES Model 325 Natural Gas Compressor, s/n JGB118311
CANAAN INDUSTRIES Model 325 Natural Gas Compressor, s/n JGB118311
CANAAN INDUSTRIES Model 325 Natural Gas Compressor, s/n JGB118311, powered by 10HP electric motor, equipped with Quincy 2-stage compressor, 480 volt electric panel, suction and discharge gauges, mounted on a steel skid base. In good condition.

INGERSOLL RAND Portable Air Compressor
INGERSOLL RAND Portable Air Compressor
INGERSOLL RAND Portable Air Compressor, s/n unknown, powered by Detroit 318 diesel engine, equipped with Ingersoll Rand 750-250 two stage compressor, heat exchanger, mounted on an oilfield skid base. In fair condition. (Meter Reads 0,160 Hours) (No Serial Number Plate) (Not Running)

(Rebuilt) Caterpillar 3408 Diesel Engine
(Rebuilt) Caterpillar 3408 Diesel Engine
(Rebuilt) Caterpillar 3408 Diesel Engine

Shop Built Drill Pipe Boat
Shop Built Drill Pipe Boat
Shop Built Drill Pipe Boat, 32’ L x 7’6” W, equipped with tapered wood deck, 8” pipe skids, stake pockets, and draw bars. In good condition. (Needs New Decking)

Shop Built Center Tub
Shop Built Center Tub
Shop Built Center Tub 35’ L x 7’ 4” W x 2’ 8” H In fair condition.

Drilling Accessories
Drilling Accessories
Drilling Accessories: 3.5”x30’ Bottle Neck Drill Pipe • 5”x30’ Drill Collars • RANGE III 7” Well Casing • RANGE III 4.5” Well Casing • RANGE II 1.5”x32’ Tubing • RANGE II 2-3/8” Upset Tubing • 5/8”x25’ Sucker Rods • 9/16”x25’ Sucker Rods • (1) 3.5”x20’; (1) 2.5”x12’; and (2) .5”x20’ Stems, with jaws • Assorted Cable Tool Rig Tooling, with rack • Power Swivel, with (2) forward and (2) reverse hydraulic motors, mounted in single axle tag-a-long trailer, with toolbox • 3.5”x7” Packer • FAILING 12” Cable Sheave • LOGAN 3.5” Well Casing Cutter • Flat Depth Measuring Line • OIL COUNTRY 200 Depthometer • (3) Down Hole Oil Pumps (1 UNUSED and 1 Rebuilt) • (2) RAMCO 4” Cable Tool Drill Bits • 60’x70’ 20-Mil Pit Liner • 8”x20’ Treated Utility Poles

Shop and Contractors Tools
Shop and Contractors Tools
Shop and Contractors Tools: MILLER Trailblazer 302 Welder/Generator, Kubota 3 cylinder diesel • LINCOLN Idealarc TM500/500 Electric Welder • Oxygen/Acetylene Torch Set, with cart (Bottles Not Included) • HYDRO-FLOW Parts Washer • RIDGID 16 Gallon Shop Vac • Air Pig • CH 110PSI, 2 Gallon Electric Air Compressor • MASTER 100,000BTU Portable Space Heater • Portable Engine Hoist • Hydraulic Floor Jack • (5) Hydraulic Bottle Jacks • Heavy Duty Vise (Pedestal Not Included) • Heavy Duty Chain Vise (Pedestal Not Included) • (2) JET 8” Dual Wheel Bench Grinders • SUN 12 Speed Drill Press • (2) Rolling Toolboxes, with contents • Assorted Pipe Wrenches • Bolt Bins and Parts Drawers, with contents • Steel Rack and Contents • Shop Cart • Flammable Liquids Cabinet • (2) Mechanics Creepers • (2) Roller Pipe Stands • MASPORT HXL75W Vac Pump • 2” Trash Pump • HUSQVARNA 41 Chain Saw • HUSQVARNA 445 Chain Saw • (2) ECHO String Trimmers

Real Estate (Offered “Subject To Owner’s Immediate Confirmation”)
Real Estate (Offered “Subject To Owner’s Immediate Confirmation”)
Real Estate (Offered “Subject To Owner’s Immediate Confirmation”): Approximately (10.6 Acres) – 15566 Tionesta Road (PA Route 36), Pleasantville, Pennsylvania 16341 • Allegheny Township • Venango County; (5,620 sq ft)Shop/Office Building Consisting of: 40’x80’ garage area • 32’x40’ primary office area • and 15’x76’ office addition; Garage is open steel building with 16’ eves, metal roof and siding, and garage doors on each end; Office includes reception, executive, and support offices, as well as restrooms, kitchenette, conference, and storage areas; Utilities: Electric • Well • Septic; Closing in (60) Day – With Extension if Necessary

 
1440 Cowpath Rd. Hatfield, Pa 19440 • PH: 215 361-9099 • FAX: 215 361-9212
Site Design by Bergey Creative Group © 2012