|
|
|
|
1993 DIAMOND Z Model PWG1463, 14’ Tub Grinder, s/n 1D9FX4532PN147091
1993 DIAMOND Z Model PWG1463, 14’ Tub Grinder, s/n 1D9FX4532PN147091, powered by Cat 3412, 800HP diesel engine and Cat/Twin Disc PTO, equipped with 14’ tub, 60” hammer mill, 30” folding discharge conveyor, engine roof cover, mounted on tri-axle carrier with 225/70R22.5 tires. In good condition. (Meter Reads 01,867 Hours; New Hour Clock 2018 @ 1,184 Hours) (New Hydraulic Pump 2020; New Heads, Pistons, Rings, Liners, Rods and Bearings, and Main Bearings) (New Oil Pump; Injectors 2017) (Unit #DZ2) |
|
|
1991 DIAMOND Z Model PWG1463, 14’ Tub Grinder, s/n 1D9FX4534MN147041
1991 DIAMOND Z Model PWG1463, 14’ Tub Grinder, s/n 1D9FX4534MN147041, powered by Cat 3412, 800HP diesel engine and Cat/Twin Disc PTO, equipped with 14’ diameter tub, 60” hammer mill, 30” folding discharge conveyor, hydraulic stabilizers, mounted on tri-axle carrier with 255/70R22.5 tires. In good condition. (Hobbs Meter Reads 0,367 Hours; 02,360 Hours On Mechanical Fuel Pump Clock) (September 2016 – Rebuilt Hydraulic Pump; New Turbos 2017) (Unit #DZ1) |
|
|
1998 MORBARK Model 23WCL Chiparvestor Portable Whole Tree Chipper, s/n 137
1998 MORBARK Model 23WCL Chiparvestor Portable Whole Tree Chipper, s/n 137, powered by Cat 3412, 800HP diesel engine, equipped with Morlift 500 log loading boom, rotating grapple, hydraulic discharge chute, operators cab, gas powered air compressor, mounted on tandem axle carrier. In good condition with good tires. (Meter Reads 00,556 Hours) (New Cat Engine With Approximately 1,639 Hours; 00,578 Hours On Engine Mechanical Clock) |
|
|
1989 TIMBCO Model T420 Crawler Feller Buncher, s/n 4C-013-121489
1989 TIMBCO Model T420 Crawler Feller Buncher, s/n 4C-013-121489, powered by Cummins diesel engine and hydraulic drive, equipped with Timbco feller head with 28” slasher saw, s/n SW-622-100995A, enclosed operators cab with heat and air conditioning, and 23.5” SBG pads on Cat undercarriage group. In good condition with good undercarriage. (Meter Reads 3,075 Hours) (5/18 Both Hydrostatic Pumps and Drive Motors Replaced – Approximately 500 Hours) (3/05 – New Main Hydraulic Pump and Spool Valve; Operator Seat Joystick Controls Replaced – Approximately 2,600 Hours) (2/04 – New Motor Installed – Approximately 3,000 Hours) |
|
|
2010 CATERPILLAR Model 525C Grapple Skidder, s/n CH52500888
2010 CATERPILLAR Model 525C Grapple Skidder, s/n CH52500888, powered by Cat C-7 Acert, 300HP diesel engine and hydrostatic transmission, equipped with dual arch boom with Cat rotating grapple, hydraulic winch, 8’11” stacking blade, enclosed ROPS cab with air conditioning, sweeps and screens, and 30.5L-32 logging tires. In good condition with good tires. (Meter Reads 10,701 Hours) (2018 - Rebuilt Arch Cylinders, Pins, and Bushings) |
|
|
1995 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN00297
1995 CATERPILLAR Model 525 Grapple Skidder, s/n 1DN00297, powered by Cat 3304 diesel engine and hydrostatic transmission, equipped with Esco dual arch boom with rotating grapple, 8’11” stacking blade, enclosed ROPS cab with air conditioning, sweeps and screens, and 30.5L-32 logging tires. In good condition with good tires. (Meter Reads 14,427 Hours) |
|
|
MORBARK MORBELL 3-Wheeled Skidder, s/n 299-198
MORBARK MORBELL 3-Wheeled Skidder, s/n 299-198, powered by Cummins 3.9L diesel engine and hydrostatic transmission, equipped with knuckleboom with rotating grapple, enclosed ROPS cab with screens, 23.1-26 forestry, 40x19-19.5 steer tire. In good condition with fair to good tires. (Meter Reads 5,943 Hours) |
|
|
2000 TESAB Model RK1012 Roto Crusher Portable Impact Crusher, s/n 051069329
2000 TESAB Model RK1012 Roto Crusher Portable Impact Crusher, s/n 051069329, powered by Cat 3306 diesel engine, equipped with vibrating grizzly feeder with hydraulic wings, Tesab RK1012 impact crusher, s/n 1069, 36” discharge belt, Eriez 30” hydraulic cross-belt magnet, mounted on tri-axle carrier, and 385/65R22.5 tires. In good condition with good tires. (Meter Reads 00,552 Hours) |
|
|
2017 CATERPILLAR Model 336FL Hydraulic Excavator, s/n RKB10268
2017 CATERPILLAR Model 336FL Hydraulic Excavator, s/n RKB10268, powered by Cat C9.3 diesel engine, equipped with 13’ dipper stick with hydraulic beyond and stiff arm bracket, Cat hydraulic coupler, Cat 48” digging bucket, enclosed ROPS cab with air conditioning and screens, and 34” TBG pads.. In good to very good condition with good to very good undercarriage. (Meter Reads 4,441 Hours) (Purchased New) |
|
|
2014 CATERPILLAR Model 318EL Hydraulic Excavator, s/n WZS00250
2014 CATERPILLAR Model 318EL Hydraulic Excavator, s/n WZS00250, powered by Cat C4.4 diesel engine, equipped with 10’2” dipper stick with hydraulic beyond and stiff arm bracket, Cat hydraulic coupler, 42” digging bucket, enclosed ROPS cab with air conditioning and screen and 24” TBG pads. In good to very good condition with good to very good undercarriage. (Meter Reads 4,194 Hours) (Purchased New) |
|
|
2006 CATERPILLAR Model 330DL Hydraulic Excavator, s/n MWP00933
2006 CATERPILLAR Model 330DL Hydraulic Excavator, s/n MWP00933, powered by Cat C-9 diesel engine, equipped with 10’6” dipper stick with hydraulic beyond and stiff arm bracket, Cat hydraulic coupler, 48” digging bucket, enclosed ROPS cab with air conditioning and screens, and 34” TBG pads. In good condition with good undercarriage. (Meter Reads 12,221 Hours) (Top End Engine Rebuild 3,500 Hours Ago) (11/21 – Replaced Front Idlers – Approximately 500 Hours) (1/18 – Replaced Cylinder Head and Turbo – Approximately 3,000 Hours) (9/16 – Replaced Main Hydraulic Pump with 336 Update and Complete Undercarriage – Approximately 4,000 Hours) (Hammer Sold Separately) (Purchased New) |
|
|
2002 CATERPILLAR Model 330CL Hydraulic Excavator, s/n DKY00494
2002 CATERPILLAR Model 330CL Hydraulic Excavator, s/n DKY00494, powered by Cat diesel engine, equipped with 13’ dipper stick with hydraulic beyond and stiff arm bracket, Cat hydraulic coupler, 48” digging bucket, enclosed ROPS cab with air conditioning and screens, and 33.5” TBG pads. In good condition with good undercarriage. (Meter Reads 17,619 Hours) (Tag Missing – s/n Stamp) (Main Hydraulic Pump Replaced 2011 – Approximately 7,000 Hours on Pump) (Purchased New) |
|
|
1995 CATERPILLAR Model 330L Hydraulic Excavator, s/n 5YM00766
1995 CATERPILLAR Model 330L Hydraulic Excavator, s/n 5YM00766, powered by Cat 3306B diesel engine, equipped with 11’2” dipper stick with stiff arm bracket, 42” digging bucket, enclosed ROPS cab with screens, and 30” TBG pads. In good condition with good undercarriage. (Meter Reads 15,278 Hours) |
|
|
Grapples and Demolition Attachments
Grapples and Demolition Attachments: CP 5-Tine Grapple, quick coupler (Cat 330D/336) (Purchased New) • WBM 5-Tine Grapple, quick coupler (Cat 330D/336) (Purchased New) • CAT 5-Tine Grapple, quick coupler (Cat 318) (Purchased New) • LABOUNTY 5-Tine Grapple, direct pin (Cat 330L) • 5-Tine Grapple, quick coupler (Cat 330C) • Shop Made 25’ Demolition Boom, quick coupler (Cat 330) • Shop Made 12’6” Demolition Boom, quick coupler (Cat 318) • Shop Made 10’ Demolition Boom, quick coupler (Cat 330) • Stump Splitting Spade, quick coupler • 4,000 lb Demolition Ball • UNUSED CAT Cutting Edge Assembly for 48” Bucket • Digging Buckets: • CP 36”, quick coupler (Cat 330D/336) • AIM 24” Digging Bucket, quick coupler (Cat 318) • 42” Digging Bucket, quick coupler and grading lip (Cat 330D/C) |
|
|
2007 CATERPILLAR Model 963C Crawler Loader, s/n BBD02900
2007 CATERPILLAR Model 963C Crawler Loader, s/n BBD02900, powered by Cat 3126 diesel engine and hydrostatic transmission, equipped with general purpose loader bucket with teeth, enclosed ROPS cab with air conditioning and screens, and Cat System 1 undercarriage with 21.5” DBG pads. In good condition with good undercarriage. (Meter Reads 8,197 Hours) (Purchased With 3,000 Hours – Cat) |
|
|
1999 CATERPILLAR Model 963B LGP Crawler Loader, s/n 9BL03282
1999 CATERPILLAR Model 963B LGP Crawler Loader, s/n 9BL03282, powered by cat 3116 diesel engine and hydrostatic transmission, equipped with general purpose loader bucket with teeth, front auxiliary hydraulics, enclosed ROPS cab with air conditioning, and 22” DBG pads. In good condition with good undercarriage. (Meter Reads 12,737 Hours) (11/19 – Main Hydraulic Pump Replaced; Undercarriage Replaced Approximately 1,000 Hours) |
|
|
1994 CATERPILLAR Model 963 Crawler Loader, s/n 21Z05464
1994 CATERPILLAR Model 963 Crawler Loader, s/n 21Z05464, powered by Cat 3304 diesel engine and hydrostatic transmission, equipped with general purpose loader bucket with teeth, enclosed ROPS cab with front screen, and 22” DBG pads. In good condition with good undercarriage. (Meter Reads 15,860 Hours) (7/14 – Replaced Motor With Running Takeout With 3,400 Hours - Approximately 5,500 Hours Ago) (Purchased New) |
|
|
1992 CATERPILLAR Model 973 LGP Crawler Loader, s/n 86G00863
1992 CATERPILLAR Model 973 LGP Crawler Loader, s/n 86G00863, powered by Cat diesel engine and hydrostatic transmission, equipped with general purpose loader bucket with teeth, enclosed ROPS cab with air conditioning, and 20.5” DBG pads. In good condition with good undercarriage. (Meter Reads 16,199 Hours) |
|
|
KOMATSU Model D45 Crawler Tractor
KOMATSU Model D45 Crawler Tractor, s/n unknown, powered by Komatsu diesel engine and powershift transmission, equipped with straight blade with tilt, drawbar, ROPS canopy, and 18” SBG pads. In fair to good condition with good undercarriage. (Missing ID Plate; Model and Serial Number from Records) |
|
|
1997 JOHN DEERE Model 644G Rubber Tired Loader, s/n 559236
1997 JOHN DEERE Model 644G Rubber Tired Loader, s/n 559236, powered by John Deere diesel engine and powershift transmission, equipped with general purpose loader bucket with bolt-on cutting edge, enclosed ROPS cab with heat, and 23.5R25 tires. In good condition with good tires. (Meter Reads 10,667 Hours) |
|
|
1991 CATERPILLAR Model D30D, 4x4, 30 Ton End Dump, s/n 3AJ00258
1991 CATERPILLAR Model D30D, 4x4, 30 Ton End Dump, s/n 3AJ00258, powered by Cat 3306B diesel engine and powershift transmission, equipped with cab with air conditioning, and 29.5R25 tires. In good condition with good tires. (Meter Reads 15,540 Hours) |
|
|
1976 RAYGO Rascal Model 410A Vibratory Compactor, s/n 21C336
1976 RAYGO Rascal Model 410A Vibratory Compactor, s/n 21C336, powered by Detroit 453 diesel engine and hydrostatic transmission, equipped with 84” smooth drum, drum drive, ROPS canopy, and 23.1-26 tires. In good condition with good tires. (Meter Reads 0,214 Hours) (Missing ID Plate – Model and Serial Number From Records) |
|
|
2008 CATERPILLAR Model 232B2 Skid Steer Loader, s/n SCH03213
2008 CATERPILLAR Model 232B2 Skid Steer Loader, s/n SCH03213, powered by cat diesel engine and hydrostatic transmission, equipped with 68” general purpose loader bucket, enclosed ROPS cab with air conditioning and demo screens, and solid cushion tires. In good condition with good tires. (Meter Reads 4,521 Hours) (New Complete Engine from Cat January 2022) (Purchased From Cat 1,500 Hours) |
|
|
1999 JCB Model 1105 Skid Steer Loader, s/n 0804133
1999 JCB Model 1105 Skid Steer Loader, s/n 0804133, powered by diesel engine and hydrostatic transmission, equipped with 68” general purpose loader bucket, enclosed ROPS cab with screens, and solid foam filled tires. In fair condition with fair tires. (Meter Reads 2,611 Hours) |
|
|
2008 TORO Model TX525 Dingo Walk Behind Crawler Loader, s/n 280000242
2008 TORO Model TX525 Dingo Walk Behind Crawler Loader, s/n 280000242, powered by Kubota diesel engine and hydrostatic transmission, equipped with 42” general purpose loader bucket, 23.5” coupler, auxiliary hydraulics, and rubber tracks. In good condition. (Meter Reads 1,080 Hours) (New Rubber Tracks) |
|
|
CATERPILLAR Model V60B Pneumatic Tired Forklift
CATERPILLAR Model V60B Pneumatic Tired Forklift, s/n unknown, powered by flathead 6 cylinder gas engine and hydrostatic transmission, equipped with 6,000 lb, 48” forks, 2-stage mast, and FOPS canopy. In good condition. (Meter Reads 5,498 Hours) |
|
|
Attachments
Attachments: IWI 10’ Forklift Boom, 20,000 lb capacity, 2-section manual extension • (4) UNUSED Pneumatic Tires on Wheels (Cat 232B2) • 68” Grapple Bucket (Skid Steer) |
|
|
1996 PETERBILT Model 379 Tri-Axle Truck Tractor
1996 PETERBILT Model 379 Tri-Axle Truck Tractor, VIN# 1XP5DB9X9TN401025, powered by Cat 3406, 425HP diesel engine (increased to 460HP) and Eaton Fuller 8LL, 10 speed transmission, equipped with 44,000 lb rears, 12,680 front axle, wetline system, Peterbilt Air Trac air ride suspension, 2-stage engine brake, double frame, locking differential, aluminum headache rack, aluminum fenders, aluminum wheels, power mirror, cruise control, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 0,454,307 Miles) (Full Motor Rebuild – Approximately 45,000 Miles – January 2018) (New Rod and Main Bearings, Pistons, Rings, Liners, Oil Jets, and Injectors) |
|
|
2007 MACK Model CHN613 Tandem Axle Truck Tractor
2007 MACK Model CHN613 Tandem Axle Truck Tractor, VIN# 1M1AJ06Y47N010008, powered by Mack E427 diesel engine (increased to 460HP) and Maxitorque T310, 10 speed transmission, equipped with 40,000 lb rears, 12,000 lb front axle, wetline kit, air slide 5th wheel, air ride suspension, aluminum wheels, cruise control, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 688,103 Miles) (New Long Block From Mack – Approximately 125,000 Miles 9/16; New Rear Axle Approximately 50,000 Miles) |
|
|
2005 PETERBILT Model 378 Tandem Axle Truck Tractor
2005 PETERBILT Model 378 Tandem Axle Truck Tractor, VIN# 1XPFD40X25D835809, powered by Cummins ISX475, 500HP diesel engine and Eaton Fuller RTL016918B, 18 speed transmission, equipped with 46,000 lb rears, 12,000 lb front axle, wetline system, Peterbilt Air Trac air ride suspension, 3-stage engine brake, double frame, full locking differential, air slide 5th wheel, aluminum headache rack, aluminum wheels, cruise control, air conditioning, 11R22.5 front and 11R24.5 rear tires. In good condition with good tires. (Odometer Reads 141,564 Miles) (Meter Reads 8,597 Hours) |
|
|
2005 PETERBILT Model 378 Tandem Axle Truck Tractor
2005 PETERBILT Model 378 Tandem Axle Truck Tractor, VIN# 1XPFDB0X05D874872, powered by Cat C15, 625HP double turbo diesel engine and Eaton Fuller 13 speed transmission, equipped with 46,000 lb rears, 12,860 lb front axle, wetline system, Peterbilt Air Trac air ride suspension, 3-stage engine brake, double frame, air slide 5th wheel, aluminum wheels, cruise control, air conditioning, and 11R24.5 tires. In good condition with good tires. (Odometer Reads 402,156 Miles) (Meter Reads 9,478 Hours) |
|
|
2000 FREIGHTLINER Tandem Axle Truck Tractor
2000 FREIGHTLINER Tandem Axle Truck Tractor, VIN# 1FUY3WEB2YDG23675, powered by Cat C12 diesel engine and Eaton Fuller 9 speed transmission, equipped with 40,000 lb rears, 12,000 lb front axle, wetline kit, single frame, air ride suspension, Jacobs engine brake, and 11R22.5 tires. In fair to good condition with fair to good tires. (Odometer Reads 628,037 Miles) |
|
|
2020 FONTAINE Model Magnitude 55HDSR Heavy Haul 55 Ton Tri-Axle Lowboy Trailer
2020 FONTAINE Model Magnitude 55HDSR Heavy Haul 55 Ton Tri-Axle Lowboy Trailer, VIN# 57JE52306L3577716, equipped with non ground bearing hydraulic detachable, 26’ drop side deck, 102” wide, boom well, air lift 3rd axle, 4th axle prepped, adjustable ride height, Hendrickson air ride suspension, outriggers and chain dogs, and 275/70R22.5 tires. In very good condition with good to very good tires. (Purchased New) |
|
|
2009 TALBERT Model TDW-40-HGR-1-T1, 40 Ton Tandem Axle Lowboy Trailer
2009 TALBERT Model TDW-40-HGR-1-T1, 40 Ton Tandem Axle Lowboy Trailer, VIN# 40FS0452991030578, equipped with non ground bearing hydraulic detachable, 22’6” level deck, 102” wide, 9’ open over wheels, spring suspension, aluminum wheels, outriggers and chain dogs, and 255/70R22.5 tires. In good condition with good tires. (Decking Fair) (Purchased New) |
|
|
2007 MAC 48’ Tandem Axle Walking Floor Trailer
2007 MAC 48’ Tandem Axle Walking Floor Trailer, VIN# 5MAMN48267C012168, equipped with Keith walking floor, 80,000 lb GVWR, aluminum smooth side, and 11R22.5 tires. In good condition with good tires. |
|
|
2006 EAST Tandem Axle Walking Floor Trailer
2006 EAST Tandem Axle Walking Floor Trailer, VIN# 1E1U2X28X6RD39267, equipped with Keith walking floor, 80,000 lb GVWR, roll tarp, Reyco spring suspension, and 11R24.5 tires. In good condition with good tires. |
|
|
2004 PEERLESS 45’ Tandem Axle Walking Floor Trailer
2004 PEERLESS 45’ Tandem Axle Walking Floor Trailer, VIN# 1PLE045214PB53686, equipped with Keith walking floor, roll tarp, Air-Weigh trailer scale, Hendrickson air ride suspension, aluminum wheels, and 11R24.5 tires. In good condition with good tires. (Missing ID Plate) (VIN# From Records) (Reconstructed Title) |
|
|
1992 EAST Tandem Axle Walking Floor Trailer
1992 EAST Tandem Axle Walking Floor Trailer, VIN# PA SPECIAL PLATE 1E1U(1)X284NRK12979, equipped with sliding tandems and 11R22.5 tires. In fair condition with fair tires. (NOTE --- Title and Plate Have Only 16 Digits) |
|
|
2009 JMH Model J3684CBMBH Tandem Axle Tub Style Steel Dump Trailer
2009 JMH Model J3684CBMBH Tandem Axle Tub Style Steel Dump Trailer, VIN# 1J9BH362491070933, equipped with Hardox lined tub-style dump body, Hendrickson air ride suspension, 70,000 lb GVWR, and 11R22.5 tires. In good condition with very good tires. (Purchased New) |
|
|
1999 SPECTEC Tandem Axle Steel Dump Trailer
1999 SPECTEC Tandem Axle Steel Dump Trailer, VIN# 1S9DS2833XS188007, equipped with spring suspension, aluminum wheels, and 11R24.5 tires. In good condition with good tires. |
|
|
1989 PARKER 30’ Tandem Axle Steel Dump Trailer
1989 PARKER 30’ Tandem Axle Steel Dump Trailer, VIN# 1P9DS7H23KA053336, equipped with spring suspension, 80,000 lb GVWR, and 11R22.5 tires. In fair to good condition with good tires. (Reconstructed Title) |
|
|
1997 MACK Model CH613 Tandem Axle Log Loader Tractor
1997 MACK Model CH613 Tandem Axle Log Loader Tractor, VIN# 1M2AA12C4VW079221, powered by E7-300, V-Mac diesel engine and Mack T2060, 6 speed transmission, equipped with Hood 8000 knuckleboom log loader with operator seat, Rotobec rotating grapple, Hendrickson air ride suspension, Jacobs engine brake, sliding 5th wheel, double frame/triple frame under log loader, Protech headache rack, (2) outriggers, 315/80R22.5 front and 11R22.5 rear tires. In good condition with good tires. (Odometer Reads 365,866 Miles) (Meter Reads 18,024 Hours) |
|
|
2014 MANAC Model 21242A201, 42’ Tandem Axle Log Trailer
2014 MANAC Model 21242A201, 42’ Tandem Axle Log Trailer, VIN# 5MC224213E5142997, equipped with (6) galvanized log bunks with ratchet straps, 90,000 lb GVWR, spring suspension, and 11R22.5 tires. In good to very good condition with good tires. (Purchased New) |
|
|
1964 FRUEHAUF Model PL-F2W-38, 38’ Tandem Axle Log Trailer
1964 FRUEHAUF Model PL-F2W-38, 38’ Tandem Axle Log Trailer, VIN# FWD719407, equipped with (4) log bunks, ratchet straps, and 11R22.5 tires. In good condition with very good tires. (Newer Log Bunks, Brakes, Brake Chambers, and Axle Work) |
|
|
2018 RAM Model 5500 HD, 4x4 Service Truck
2018 RAM Model 5500 HD, 4x4 Service Truck, VIN# 3C7WRNBL2JG183017, powered by Cummins 6.7L diesel engine and 6 speed manual transmission, equipped with IMT model 2015, 5,000 lb service crane with remote, Miller Bobcat 200 Air Pack compressor/welder/generator, powered by gas engine, Knapheide 11’ mechanics body, Coll-O-Crimp hydraulic hose crimper, 110 gallon fuel/20 gallon hydraulic oil tank with pumps, dual rear wheels, power windows and locks, cruise control, air conditioning, and 225/70R19.5 tires. In good to very good condition with good tires. (Odometer Reads 46,705 Miles) (Purchased New) |
|
|
2020 RAM Model 4500, 4x4 Utility Truck
2020 RAM Model 4500, 4x4 Utility Truck, VIN# 3C7WRLBLXLG260210, powered by Cummins 6.7L diesel engine and automatic transmission, equipped with Knapheide 11’ open utility body with material rack, dual rear wheels, power windows and locks, cruise control, air conditioning, and 225/70R19.5 tires. In very good condition with very good tires. (Odometer Reads 11,649 Miles) (Purchased New) |
|
|
2003 FORD Model F-450XL SD Utility Truck
2003 FORD Model F-450XL SD Utility Truck, VIN# 1FADXF46F33EA62964, powered by Powerstroke 7.3L diesel engine and 5 speed manual transmission, equipped with Knapheide 11’ open utility body, material rack, dual rear wheels, air conditioning, and 225/70R19.5 tires. In good condition with good tires. (Odometer Reads 176,401 Miles) (Replaced Engine With Running Takeout – Approximately 25,000 Miles) (Transmission Rebuilt Approximately 2017) (Purchased New) |
|
|
2001 FORD Model F-250XLT SD, 4x4 Extended Cab Pickup Truck
2001 FORD Model F-250XLT SD, 4x4 Extended Cab Pickup Truck, VIN# 1FTNX21F21EC10104, powered by Powerstroke 7.3L diesel engine and automatic transmission, equipped with 8’ bed, 9’ snow plow package, alloy wheels, power windows and locks, cruise control, air conditioning, and 265/75R16 tires. In good condition with good tires. (Odometer Reads 208,676 Miles) (Rebuilt Transmission and Replaced Bed – May 2021) (Purchased New) |
|
|
1983 MACK Model R686ST Tri-Axle Dump Truck
1983 MACK Model R686ST Tri-Axle Dump Truck, VIN# 1M2N187X2DA003711, powered by Mack ETAZB, 673A, 315HP diesel engine and Mack 10 speed extended range splitter transmission, equipped with 15’ steel dump body with air gate, Aero power tarp, 2-stage engine brake, spring suspension, and 11R22.5 tires. In fair to good condition with good tires. (Odometer Reads 384,581 Miles) (Meter Reads 5,055 Hours) (1977 Engine) (New Transmission with Approximately 10,000 Miles) |
|
|
1987 MACK Model R686ST Tandem Axle Fuel Truck
1987 MACK Model R686ST Tandem Axle Fuel Truck, VIN# 1M2N179Y6HA006956, powered by Mack EM6-300, 300HP diesel engine and 6 speed lo-hole transmission, equipped with Allied 3,000 gallon (2500/500) aluminum fuel body with pump, meter, and hose. In fair to good condition with good tires. (Odometer Reads 851,963 Miles) |
|
|
FORD Cab Over Single Axle Water Truck
FORD Cab Over Single Axle Water Truck, VIN# D80DVC62970, powered by diesel engine and 5 speed transmission with 2 speed rear, equipped with Allied 3,000 gallon, 3-compartment aluminum body, hose reel, rear spray head, air brakes, and 11R22.5 tires. In fair to good condition with good tires. (Odometer Reads 00,758 Miles) (Water Body Good; Cab Fair; Converted Fuel Truck) |
|
|
1980 HAHN Model HCP10 Fire Pumper Truck
1980 HAHN Model HCP10 Fire Pumper Truck, s/n HCP248108035, powered by Detroit 8V-71 diesel engine and automatic transmission, equipped with 500 gallon water tank, Winco gas powered 4000 watt generator. In good condition with fair to good tires. (Odometer Reads 038,357 Miles) (Meter Reads 3,636 Hours) |
Tandem Axle 5th Wheel Dolly
Tandem Axle 5th Wheel Dolly, pintle tow, Reyco spring suspension, sliding 5th wheel, and 11R24.5 tires. (No Title – Off Road Use Only) |
|
|
Shop Tools
Shop Tools: COLL-O-CRIMP Hydraulic Hose Crimping Station, with collets, 6-braid hose capacity, Weather-Head fittings, and hydraulic hose • CAT Hydraulic Hose Press, with collets and fittings • MILLER XMT 304 CC/CV DC Inverter Arc Welder, Miller 22A wire feed unit, with cart • Post Alloy Tungsten Carbide Weld Applicator, for use in resurfacing grinding teeth • THERMO DYNAMICS Cutmaster 101 Plasma Cutter • THOMPSON Surface Grinder, 3-phase • HENDEY Lathe, 30” bed, belt drive, single phase • SOUTHBEND 10” Lathe, 24” bed, gear drive, single phase • ENCO 30 Milling and Drilling Machine, X/Y axis bed, machinist vise, single phase, 110V • 50 Ton Hydraulic Shop Press, with electric power pack • ATLAS COPCO GAUZ0-125 Rotary Screw Horizontal Air Compressor, 20HP, 3-phase • INGERSOLL RAND T30, 2-Stage Horizontal Air Compressor • INGERSOLL RAND Gas Power Air Compressor, Kawasaki 11.5HP • KOHLER Fast Response II, 65KW Generator, Ford V-8 gas, single/3-phase, with control box (924 Hours) • STRIP TEC 1000 Electric Wire Stripper • (5) 1” and 3/4” Drive Impact Wrenches • (3) CRAFTSMAN and KOBALT Rolling Toolboxes, with contents (Impact Sockets, Wrenches, Hand Tools, etc) • OTC Transmission Jack • Wheel Dolly • Floor Jack and Bottle Jacks • SNAP-ON MT552 Alternator Tester • MILWAUKEE Magnetic Drill • 500 lb Sandblast Pot • Oxygen Acetylene Torch Outfit • JET Bench Grinder • Dual Wheel Pedestal Grinder, 3-phase • Parts Washer • (4) Forklift Dump Hoppers • Steel Stock and Racks |
|
|
Contractors Tools
Contractors Tools: MILLER BOBCAT 200 Air Pac Air Compressor/Welder/Generator, Kohler gas. Very good condition (42 Hours) • COLL-O-CRIMP Portable Hose Crimper, pneumatic, with dies • (2) 2” Centrifugal Pumps, gas • 110 Gallon Fuel Tank, with pump and reel and 20 Gallon Hydraulic Tank, with pneumatic pump (For Utility Bed Mount) • (6) HUSQVARNA 372XP Chain Saws, with 28” and 20” Bars • LARGE QUANTITY Hand Tools: Socket Sets; Sockets; Wrenches; Hammers; Pliers; Screwdrivers; Etc. • WERNER 28’ Extension Ladder |
|
